Quick remedy for pots and pans not working on induction cooker

Current induction cookers are becoming more and more common, but they are very particular about the pots they use. It is a regular problem for the induction cooker to reject the pot, thus you need a quick fix for this issue. This article will explain some typical causes of the induction cooker not accepting the pot as well as effective solutions

The induction cooker does not accept the pot due to the pot material

You must have received advice regarding a set of specialty cooking pots for the kitchen when you purchased an induction cooker. High-quality stainless steel pots, pots with magnetic bottoms, pots with iron enamel, and pots made of stainless steel are currently the pot types used with induction cookers. Make sure the pot is made of stainless steel 430 or at least has a coating of the material on the bottom if it is made of stainless steel, especially if it is a pot. Additionally, cast iron that has been enameled makes it magnetic if the pots and pans are made of that material.

In contrast, the induction cooker cannot heat pots made of glass, aluminum, clay, or other materials due to their low heat-generating efficiency. From this, it is clear that the induction cooker is not compatible with the pan material you are using, which is the main cause of the stove refusing to accept the pot.

How to fix:

- Pick a pot with a magnetic base. To see if the pot that is currently in use is drawing a magnet, use a magnet. The pot material can be utilized with an induction cooker if the suction is strong.

- You must replace the new pot set with one that has a magnetic bottom if the magnet and the pot's bottom are not attracted to one another. Or you can keep utilizing the current pot set by using the support heat transfer plate. With a typical induction cooker, you place the heat transfer plate between the cooking zone and the pot's bottom.

- Typically, the pots and pans that are used with induction cookers have their own symbols. The induction cooker will have a separate sign with the words "Induction," the spiral symbol, and either the magnetic field symbol or it.

The induction cooker does not accept the pot due to the position of the cooker

If the cooker is displaced, the induction hob might also not recognize the pot. The stove does not accept the pot and issues an error message when the bottom of the pot is positioned at a completely different distance from the cooking zone setting.

How to fix: 

It's a basic fix; all you have to do is position the pot correctly again for the stove to function properly.

The induction cooker does not accept the pot due to the uneven bottom of the pot

In addition to the pot's composition, using an old pot with a concave bottom, warping, and convexity makes the induction stove uncooperative.

How to fix:

- Pick a pot that has a sturdy bottom. An over 10 cm flat bottom pot can be placed on the induction cooktop and heated. Induction cookers won't accept pots that are too small in size.

The induction cooker does not accept the pot due to the electric power of the cooker

Originally, each model of induction cooker from various brands has a varied electrical capacity design. Induction cookers typically have a smaller capacity than imported ones; the capacity and frequency of the cooker vary based on the power supply and voltage.

How to fix: 

- To fix the problem where the induction cooker won't take the pot, try increasing the cooking capacity and seeing whether the problem is resolved.

- It is advisable to research the efficiency of the stove before making a purchase and to select an induction cooker line that is compatible with US's voltage. By doing this, the likelihood that the induction cooker would reject the pot will be reduced.

The induction cooker does not accept the pot due to a broken sensor or IC

If you have tried all of the aforementioned solutions and the induction cooker still won't take a pot, the sensor or electrical IC on the stove is probably broken.

How to repair: In this situation, replacing or repairing the stove's sensor or IC is the easiest course of action. It is advised not to haphazardly change and disassemble kitchen fixtures and parts if you lack the necessary expertise. To find the best answer, you should speak with an expert.

- You can remove the stove and inspect the board as follows to look for new sections:

+ In order to collect samples for the microprocessor, it is necessary to examine the condition of the 0.33 mf and 5 mf capacitors.

+ It is essential to check the space between the induction coil and the pot's base. When the coil is slanted, a wide gap is created, which prevents the cooker from detecting the pot and turning off. 

It is necessary to determine whether the driver pair for the IGBT output is functional or not. Comparator IC needs to be checked

+ The sensors on the magnetic tray and the IGBT's underside need to be examined.

Please contact the legitimate warranty facilities if you've attempted all the above fixes and the induction cooker is still unable to fix it. I hope the aforementioned material will assist you in resolving the issues you are experiencing with the induction cooker.

Read more 

Cookware sets - Needs for every kitchen

0
0 ratings